2KZ/2K0
1-3-24
U035 Setting the printing area for folio paper
Description
Changes the printing area for copying on folio paper.
Purpose
To prevent cropped images on the trailing edge or left/right side of copy paper by setting the
actual printing area for folio paper.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting value using the cursor left/right keys.
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U037 Checking the operation of the fan motors
Description
Drives each fan motor.
Purpose
To check the operation of each fan motor.
Method
1. Press the start key.
2. Select the fan motor to be operated.
3. Press the start key. The operation starts.
To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description Setting range Initial setting
Length Length 330 to 356 mm 330
Width Width 200 to 220 mm 210
Display Description
All All fan motors are turned on
Low Power Power source fan motor (PSFM) is turned on
Container Container fan motor (CFM) is turned on
IH Coil IH Coil fan motor (IHCFM) is turned on
LSU Cooling LSU Cooling fan motor (LSUFM) is turned on
IH Edge IH fan motor (IHFM) is turned on
Service Manual Y113010-4
To Next Page
Loading...
Need help?
General
