2KZ/2K0
1-3-48
U108 Setting separation shift bias
Description
Adjusts output of separation shift bias and ON/OFF timing.
Purpose
To set when the separated malfunction of the paper occurs.
Method
1. Press the start key.
2. Select the item. The screen for executing each item is displayed.
Method
1. Select the item. The screen for executing each item is displayed.
Setting
1. Select the item to be set.
2. Change the setting value using the cursor left/right keys or numeric keys.
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Light/Normal1
Weight of paper (light to usual 1)
Normal2/3
Weight of paper (usual 2 to 3)
Heavy1
Weight of paper (heavy 1)
Coated
Kind of paper (Coated paper)
Timing
Setting of the separation timing
Display Description
1st side
Correction value of single-side printing
2nd side
Correction value of duplex printing
Display Description
Setting
range
Initial
setting
Add Normal
Lead
for the leading edge on paper
0 to 20 -
On Timing 1 Adjustment of the ON Timing 1
-100 to 100 -
On Timing 2 Adjustment of the ON Timing 2
-100 to 100 -
Off Timing Adjustment of the OFF Timing
-100 to 100 -
Service Manual Y113010-4
To Next Page
Loading...
Need help?
General
