Olivetti d-Color MF2001 - Switching between Double and Single Counts; Selecting the Timing for Copy Counting

2KZ/2K0
1-3-67
U253 Switching between double and single counts
Description
Switches the count system for the total counter and other counters.
Purpose
Used to select, according to the preference of the user (copy service provider), if folio size paper
is to be counted as one sheet (single count) or two sheets (double count).
Setting
1. Press the start key.
2. Select the item to set.
3. Select the count system.
* : Initial setting: DBL (A3/Ledger)
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U260 Selecting the timing for copy counting
Description
Changes the copy count timing for the total counter and other counters.
Purpose
To be set according to user request.
Setting
1. Press the start key.
2. Select the copy count timing.
* : Initial setting:
Eject
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Color Count system of color mode
B/W Count system of black/white mode
Display Description
SGL (All) Single count for all size paper
DBL (A3/Ledger) Double count for A3/Ledger size or larger
DBL (B4) Double count for B4 size or larger
DBLFolio) Double count for Folio size or larger
Display Description
Feed When secondary paper feed starts
Eject When the paper is ejected
Y113010-4 Sevice Manual