2KZ/2K0
1-3-39
U074 Adjusting the DP input light luminosity
Description
Sets the luminosity correction for scanning originals from the DP.
Purpose
Modify the setting only if a spotted background appears when a bluish original is scanned from
the DP.
Setting
1. Press the start key.
2. Change the setting value using the cursor left/right keys or numeric keys.
Settings 0: No correction / 1: Slight correction / 2: Medium correction / 3: Strong correction
3. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt
copying mode (which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description Setting
range
Initial set-
ting
Coefficient DP input light luminosity correction 0 to 3 0
Y113010-4 Sevice Manual
To Next Page
Loading...
Need help?
General
