2KZ/2K0
1-3-58
U161 Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U167
Checking/clearing the fuser count
Description
Displays and clears the fuser count for checking.
Purpose
To check or clear the fuser count after replacement of the fuser unit. Also to clear the counts after
replacing unit.
Method
1. Press the start key. The fuser count is displayed.
Setting:[Cnt]
1. Press [Cnt].
2. Change the setting using the cursor left/right keys or numeric keys.
3. Press the start key. The setting is set.
Clearing
1. Press [Clear].
2. Press the start key. The count is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U169
Confirmation/setting the fuser power supply
Description
Displays and settings the specification of fuser power supply for checking.
Purpose
To check or set the specification of fuser power supply after replacement of the fuser power sup-
ply.
Method
1. Press the start key. The specification of fuser power supply is displayed.
Setting
1. Change the setting using the cursor left/right keys or numeric keys.
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Cnt Fuser count value
Clear Clearness of fuser counter value
Display Description
Mode Specification of fuser power supply
(1: 100V , 2: 200V , 3: 120V )
Service Manual Y113010-4
To Next Page
Loading...
Need help?
General
