OMICRON 177
Off-service diagnostic methods
Disconnection
Do not disconnect the circuit breaker but leave it connected for performing the next test. For
disconnecting the circuit breaker, see "Disconnection" on page 211.
I DC DC test current with the circuit breaker closed
V DC Measured voltage with the circuit breaker closed
Rclosed
1
Measured resistance with the circuit breaker closed
R meas Measured contact resistance
Assessment Measurement assessment
1. Only available if the Compensate ground loop resistance check box is selected.
Table 17-37: Contact Resistance measurement data (continued)
Data Description
To Next Page
Loading...
