Omron HD-1500 Platform - Page 125

Chapter 4: Configuration
B
C
A
Pendant
Figure 4-1. Connecting an Ethernet Cable
Callout Description
A Microsoft Windows PC with Ethernet port.
B Maintenance Ethernet Port on the Operator Panel.
C Operator Panel on the HD-1500.
2.
Access the Network Connections area in Windows (this might appear differently
depending on your version of Windows).
Figure 4-2. Network Connections Screen
3.
Right-click on the Ethernet or LAN Connection.
4.
Next, click Status and then select Details.
5.
Make sure that the IPv4 address is in the range of 192.254.10.100 - 192.254.10.149.
6.
Then, close the dialog boxes.
Test the TCP/IP port connection by accessing the SetNetGo Web Interface:
31500-000 Rev A HD-1500 Platform User's Manual 126