Omron HD-1500 Platform - Page 127

Chapter 4: Configuration
Access the SetNetGo OS through the MobilePlanner software:
MobilePlanner >SetNetGo >Networking
NOTE: You can use a web browser to connect directly to the SetNetGo OSon a
platform. This allows your IT support to set up the network for you, without
using MobilePlanner.
Set Up a Wireless Network on the Management Interface
To set up the wireless network, you need the following resources. Discuss this with your net-
work administrator and use the following the table as a worksheet to gather the necessary
data.
Description Your Data
A static IP address
The netmask for your network
Gateway
DNS server(s)
SSID for the AMR network
Mode for the network Infrastructure
Radio Mode Auto
(802.11a/b/g
Only)
802.11b/g 802.11ac/n 802.11
Channel Set
Wireless Watchdog IP Address
Wireless Watchdog Max Count (0
disables)
Security encryption Disabled WEP 64-bit WEP 128-bit
TKIP/RC4 CCMP/AES TKIP/CCMP/AES
Authentication Method OPEN (not
recommended
WPA2-PSK Key is either: Passphrase (8-63 ASCII-
only) Raw Hex (64 Hex-only)
WPA-PSK Key is either: Passphrase (8-63 ASCII-
only) Raw Hex (64 Hex-only)
PEAP-
MSCHAPv2
following fields are required:
Username:
Password:
Private key:
Download or Create New
31500-000 Rev A HD-1500 Platform User's Manual 128