129 HD-1500 Platform User's Manual 31500-000 Rev A
4.1 Settings and Configuration
Description Your Data
Private key length: 1024 or 2048 bit Host-
name:
Upload certificate:
certificate password (if needed):
Validate Server Certificate:
EAP-TLS following fields are required:
Username:
Password:
Private key:
Download or Create New
Private key length: 1024 or 2048 bit Host-
name:
Upload certificate:
certificate password (if needed):
Validate Server Certificate:
Figure 4-3. Worksheet: Data required to Configure the Wireless Network
After you connect to the SetNetGo Web Interface, navigate to the Management Interface:
1.
Click the Network tab.
2.
Click Management Interface in the sidebar.
3.
Follow the steps in the interface to enter the network data.
4.
Click Apply for your changes to take effect.
Wireless Signal Availability
Your wireless network should provide constant service throughout the workspace. Consider
the following network resource requirements:
l
Signal Availability—If you have an AMR fleet, constant access is an operational require-
ment. For a single or segregated AMR's, partial signal cover might be acceptable in
workspace areas where you do not need to send commands or receive status from the
AMR.
l
Signal Strength—A signal of >=-40 dBm is the ideal WiFi signal strength, -60 dBm is
the recommended minimum.
IMPORTANT: OMRON recommends that you use wireless network industry
best practices to conduct a comprehensive workspace survey and test your wire-
less service.
To Next Page
Loading...
