Omron HD-1500 Platform - Page 250

251 HD-1500 Platform User's Manual 31500-000 Rev A
8.7 Replacing Non-Periodic Parts
B
A
Figure 8-43. (A) Top and Bottom Charging Contacts, and (B) M5 Screws Attaching the Electrical Con-
nections to the Corner Casting
Follow these steps to replace the charging contacts:
1.
Unscrew the M5 screws ((B) in Figure 8-43. ) attaching the top and the bottom electrical
connections to the corner casting. Use the 4 mm wrench to remove these screws.
2.
Next, unscrew all four M5 screws ((A) in Figure 8-44. that attach the contact holders ((B)
in Figure 8-44. to the base plate ((D) in Figure 8-44.
Retain the screws for installing the new charging contacts ((C) in Figure 8-44.