Omron SYSDRIVE 3G3RV Series User Manual

5
-
34
*1.The factory setting depends upon the Inverter capacity. The value for a 200-V class Inverter of 0.4 kW is given.
*2.The setting range is 10% to 200% of the Inverter's rated output current. The value for a 200-V class Inverter of 0.4 kW is given.
*3.The factory setting depends upon the Inverter capacity. The value for a 200-V class Inverter of 0.4 kW is given.
E2-05
Motor line-
to-line resis-
tance
Sets the motor phase-to-
phase resistance in Ω units.
This parameter is automati-
cally set during autotuning.
0.000
to
65.000
9.842
Ω
*1
No A A A 312H 6-127
Term Resis-
tance
E2-06
Motor leak
inductance
Sets the voltage drop due to
motor leakage inductance as
a percentage of the motor
rated voltage.
This parameter is automati-
cally set during autotuning.
0.0 to
40.0
18.2%
*1
No No No A 313H 6-127
Leak Induc-
tance
E2-07
Motor iron
saturation
coefficient 1
Sets the motor iron satura-
tion coefficient at 50% of
magnetic flux.
This parameter is automati-
cally set during autotuning.
0.00 to
0.50
0.50 No No No A 314H 6-127
Saturation
Comp1
E2-08
Motor iron
saturation
coefficient 2
Sets the motor iron satura-
tion coefficient at 75% of
magnetic flux.
This parameter is automati-
cally set during autotuning.
0.00 to
0.75
0.75 No No No A 315H 6-127
Saturation
Comp2
E2-10
Motor iron
loss for
torque com-
pensation
Sets motor iron loss in W
units.
0 to
65535
14 W
*1
No A A No 317H 6-127
Tcomp Iron
Loss
E2-11
Motor rated
output
Set the rated output of the
motor in units of 0.01 kW.
This parameter is automati-
cally set during autotuning.
0.00 to
650.00
0.40
*1
No Q Q Q 318H -
Mtr Rated
Power
Param-
eter
Number
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
Register Page
LCD
Display
V/f
V/f
with
PG
Open
Loop

Omron SYSDRIVE 3G3RV Series Specifications

General

Brand	Omron
Model	SYSDRIVE 3G3RV Series
Category	Inverter
Language	English