Omron SYSDRIVE 3G3RV Series

5
-
36
*1.These are values for a 200-V class Inverter. Val ues for a 400-V class Inverter are double.
*2.The factory setting will change when the control method is changed. (V/f control factory settings are given.)
*3.When C6-01 is set to 0, the upper limit of the setting range is 150.0 Hz.
*4.For (-E) models. Factory setting for base frequency is 50 Hz.
E3-08
Motor 2
min. out-
put fre-
quency
voltage
(VMIN)
To set V/f characteristics in a
straight line, set the same values
for E3-05 and E3-07.
In this case, the setting for E3-06
will be disregarded.
Always ensure that the four fre-
quencies are set in the following
manner:
E3-02 (FMAX) ≥ E3-04 (FA) >
E3-05 (FB) > E3-07 (FMIN)
0.0 to
255.0
*1
9.0 V
*1
No A A A 320H -
Min Vol t-
age
Param-
eter
Num-
ber
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
Register
Page
LCD
Display
V/f
V/f
with
PG
Open
Loop
Output voltage (V)
Frequency (Hz)