Omron SYSDRIVE 3G3RV Series User Manual

5
-
40
F1-08
Overspeed
detection
level
Sets the overspeed detection
method.
Frequencies above that set
for F1-08 (set as a percent-
age of the maximum output
frequency) that continue to
exceed this frequency for the
time set in F1-09 are
detected as overspeed faults.
0 to
120
115% No No A No 387H 6-144
PG Over-
spd Level
F1-09
Overspeed
detection
delay time
0.0 to
2.0
1.0 s No No A No 388H 6-144
PG Over-
spd Time
F1-10
Excessive
speed devia-
tion detec-
tion level
Sets the speed deviation
detection method.
Any speed deviation above
the F1-10 set level (set as a
percentage of the maximum
output frequency) that con-
tinues for the time set in F1-
11 is detected as a speed
deviation.
Speed deviation is the differ-
ence between actual motor
speed and the reference com-
mand speed.
0 to 50 10% No No A No 389H 6-144
PG Deviate
Level
F1-11
Excessive
speed devia-
tion detec-
tion delay
time
0.0 to
10.0
0.5 s No No A No 38AH 6-144
PG Deviate
Time
F1-12
Number of
PG gear
teeth 1
Sets the number of teeth on
the gears if there are gears
between the PG and the
motor.
A gear ratio of 1 will be used
if either of these parameters
is set to 0.
0 to
1000
0 No No A No 38BH 6-144
PG# Gear
Teeth1
F1-13
Number of
PG gear
teeth 2
0 No No A No 38CH 6-144
PG# Gear
Teeth2
F1-14
PG open-
circuit
detection
time
Used to set the PG discon-
nection detection time. PGO
will be detected if the detec-
tion time continues beyond
the set time.
0.0 to
10.0
2.0 s No No A No 38DH 6-144
PGO Detect
Time
Param-
eter
Number
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
Register Page
LCD
Display
V/f
V/f
with
PG
Open
Loop
Input pulses from PG 60 F1-13
F1-01 F1-12

Omron SYSDRIVE 3G3RV Series Specifications

General

Brand	Omron
Model	SYSDRIVE 3G3RV Series
Category	Inverter
Language	English