RFC 4072S
168 / 272
PHOENIX CONTACT 108580_en_02
Figure 7-9 PLCnext directory “/opt/plcnext” in the parameterization memory.
7.4 Setting the realtime clock under PLCnext Engineer
You can set the realtime clock in the PLCnext Engineer software.
• In the “PLANT” area, double-click on the “PLCnext” node.
The editor group of the “/ PLCnext” controller opens.
• Select the “Online Parameters” editor.
Figure 7-10 Realtime clock settings for the RFC 4072S
• Click on the button to read the values from the device and apply them to the proj-
ect.