NOTE: UL Warning Instructions
– If the device is not used in the specified manner, the protection provided by the device may be impaired.
– Minimum temperature rating of the cables to be connected to the field wiring terminals: 70 °C
– The device has to be built in the final safety enclosure, which has adequate rigidity according to
UL 61010-1, UL 61010-2-201 and meets the requirements with respect to spread of fire.
– Use copper conductors only.
– The external circuits intended to be connected to the device shall be galv. separated from mains supply
or hazardous live voltage using reinforced or double insulation and meet the requirements of PELV circuit.
To Next Page
Loading...
Need help?
General
