105
Polyend Tracker+ Manual
FX Type Description
D
Overdrive amount for the step
L
Low Pass Filter Cutoff. Frequency represented by 0-100%
B
Low Pass Filter Cutoff. Frequency represented by 0-100%
H
Low Pass Filter Cutoff. Frequency represented by 0-100%
s
Delay. Amount of send effect 0-100%
t
Reverb. Amount of send effect 0-100%
E
Bit depth. 4 Bits to 16 Bits.
U
Tuning. -24 semitones to +24 Semitones. 4 Octave range.
F
Slide up amount. Range is 0-255 with 1/16
th
semitone increments.
J Slide down amount. Range is 0-255 with 1/16
th
semitone increments.
a
CC A / Macro 1 (MIDI CC Number of Synth Macro). MIDI also needs an
assigned channel & Instrument to the step.
b
CC B / Macro 2 (MIDI CC Number of Synth Macro). MIDI also needs an
assigned channel & Instrument to the step.
c
CC C / Macro 3 (MIDI CC Number of Synth Macro). MIDI also needs an
assigned channel & Instrument to the step.
d
CC D / Macro 4 (MIDI CC Number of Synth Macro). MIDI also needs an
assigned channel & Instrument to the step.
e
CC E / Macro 5 (MIDI CC Number of Synth Macro). MIDI also needs an
assigned channel & Instrument to the step.
f
CC F / Macro 6 (MIDI CC Number of Synth Macro). MIDI also needs an
assigned channel & Instrument to the step.
0 MIDI Chord, note output. (Used also with Arp).
NOTES
Sequencing Steps
5
To Next Page
Loading...
