145
Polyend Tracker+ Manual
NOTES
Instruments
6
▌ OVERVIEW OF SYNTHESIZER BASIC PATCH CONTROLS
1. Ensure the project in which to work is open and active and a pattern
selected for editing.
2. To edit the synth and change the model for the synth on the selected
step, Press [Instrument Parameters]. Ensure page 1/2 is selected.
3. A synth patch can also be loaded if required by pressing [Load Patch]
and select from the patch list. Ensure the project in which to work is
open and active.
4. For patch management:-
• To load a patch. Press [Load Patch] Screen button to open the
patch browser to select a patch preset to load.
• To edit the currently selected patch. Press [Edit Patch] to open the
patch editor and access the settings for the patch parameters
including macro assignments. Patches can also be saved and
initialised in the editor.
To Next Page
Loading...
