Polyend Tracker+ - Page 153

153
Polyend Tracker+ Manual
NOTES
Instruments
6
Continued
Function Parameter Range Description
Amplier Env Attack 0.00-10 Sec Amplier envelope attack time
Amplier Env Decay 0.00-10 Sec Amplier envelope decay time
Amplier Env Sustain 0.00-100% Amplier envelope sustain level
Amplier Env Release 0.00-10 Sec Amplier envelope release time
Envelope 1 Attack 0.00-10 Sec Amplier envelope attack time
Envelope 1 Decay 0.00-10 Sec Amplier envelope decay time
Envelope 1 Sustain 0.00-100% Amplier envelope sustain level
Envelope 1 Release 0.00-10 Sec Amplier envelope release time
Envelope 2 Attack 0.00-10 Sec Amplier envelope attack time
Envelope 2 Decay 0.00-10 Sec Amplier envelope decay time
Envelope 2 Sustain 0.00-100% Amplier envelope sustain level
Envelope 2 Release 0.00-10 Sec Amplier envelope release time
LFO 1 Sync Options
When set to On, Oscillator 2 resets on each
cycle of Oscillator 1 (Osc 1 controls pitch).
LFO 1 Ratio 0-100 Hz
LFO 1 Waveform Options
Modulation wave shape: Triangle; Sin; Ramp
Up; Ramp Down; Square; Random S&H
LFO 1 Retrigger Options
Waveform retrigger: Free running will
continuously run; One Shot will cycle once
when a note is triggered; Note will trigger
from the start and continuously run each
time a note is triggered.
LFO 2 Sync Options
When set to On, Oscillator 2 resets on each
cycle of Oscillator 1 (Osc 1 controls pitch).
LFO 2 Ratio 0-100 Hz
LFO 2 Waveform Options
Modulation wave shape: Triangle; Sin; Ramp
Up; Ramp Down; Square; Random S&H
LFO 2 Retrigger Options
Waveform retrigger: Free running will
continuously run; One Shot will cycle once
when a note is triggered; Note will trigger
from the start and continuously run each
time a note is triggered.