Polyend Tracker+ - Page 161

161
Polyend Tracker+ Manual
NOTES
Instruments
6
Function Parameter Range Description
Snare Model Options
Classic8, Classic9, Classic9+, Modern,
Modern+
Snare Pitch C0-B8 Pitch of snare based on note values.
Snare Tone 0-100% Snare tone
Snare Body Wave Options
Sat-Sin 0%-100%, Triangle 0%-100%,
Square 0%-100%, Square FM 0%-100%,
FM1 0%-100%, FM3 0%-100%, FM7 0%-
100%, FM 11 0%-100%, tzFM1 0%-100%,
txFM3 0%-100%, tzFM7 0%-100%, txFM11
0%-100%, Glitch 1 0%-100%, Glitch 2 0%-
100%, Glitch 3 0%-100%, Glitch 4 0%-100%
Snare Body Decay 0-10 Sec Decay stage time of snare transient
Snare Snap Attack 0-10 ms Attack stage time of snare snap
Snare Snap Decay 0-10 Sec Snap decay time
Snare Snap Timbre 0-100% Timbre sound characteristic of snap stage
Snare Body/Snap Mix -100 to +100 Balance of snap and body tones
Function Parameter Range Description
Hi Hat Model Options Classic, FM
Hi Hat Timbre 0-24 Timbre sound characteristic
Hi Hat Closed Decay 0-10 Sec Decay stage time of open hi hat
Hi Hat Open Decay 0-10 Sec Decay stage time of closed hi hat
Hi Hat Decay Shape 0-100% Shape of decay curve
Hi Hat HPF Cutoff 10Hz - 20kHz High pass lter cutoff frequency
Hi Hat LPF Cutoff 10Hz - 20kHz Low pass lter cutoff frequency
Hi Hat Tone Pitch 100 - 880Hz Pitch in Hz of the Hi Hat Tone stage
Hi Hat Tone/Noise Mix -100 to +100 Balance of hi hat noise and tone
Continued
The Snare percussion element is triggered with note D4 in a pattern.
The Hi Hat percussion elements are triggered with notes E4-G4 in a pattern.