Polyend Tracker+ - Page 231

231
Polyend Tracker+ Manual
NOTES
Audio
8
The ability to export and import classic mod les is possible as a beta
feature. There is no guarantee that third party les will be fully compatible
with the Polyend Tracker+.
▌ EXPORTING AN .IT FILE
1. Press [File] to select the le options page.
2. Press [Export], 6
th
Screen button to select the export specic options.
3. Press [Export As .it], 5
th
Screen button to render and export the project.
4. The current project will be rendered and exported. A prompt may be
presented to save the current project. The conversion and export
process may take a few minutes.
5. The les are saved on the SD Card but are not visible in the sample
loader as this only represents samples. The les are however visible in
the Tracker+ le menu.
▌ IMPORTING AN .IT FILE
1. Press [File] to select the le options page.
2. Press [Import Mod], 3
rd
Screen button to select the import option.
3. Any available les are visible in the display window. If .it les have been
previously exported they will be visible here. The saved .it les are
managed with the original project name as the le name.
4. Navigate the le options using the [Up] [Down] or Turn (Jog) to highlight
and select the desired le.
5. Press [Import], 8
th
Screen Button to open the .it le. Alternatively Press
[Cancel], 7
th
Screen button to exit without loading.
6. The .it File can also be deleted, Press [Delete], 3
rd
Screen button to
delete the le from the SD Card. Conrm deletion when prompted.