Polyend Tracker+ - Page 282

282
Polyend Tracker+ Manual
NOTES
MIDI
11
The settings in the cong menu will depend on:-
• How the devices are connected together? Are the devices
connected by USB? Which will transmit and receive MIDI with the
MIDI 5 Pin connection using the MIDI Jack adapter?
• Which device will be a primary leader (main controller e.g. main
clock) or a secondary follower (will respond to other gear as the lead
control e.g. synchronised to another clock)?
• Will MIDI note data (melodies, chords, etc) be communicated?
• Will MIDI CC control change data be communicated (to change
parameters like delay level or trigger performance effects)?
▌ ACCESSING THE MIDI CONFIG OPTIONS
1. Press [Cong] to open the conguration menu.
2. In the rst column, select ‘MIDI’. Use the 1
st
and 2
nd
Screen button to
navigate. Alternatively use [Left] or [Right] to navigate menus and Turn
(Jog) or [Up] or [Down] to select a function.
3. The ‘MIDI’ Options will be available in the central menu window. Use the
4
th
and 5
th
Screen button to navigate. Alternatively use [Left] or [Right] to
navigate menus and Turn (Jog) or [Up] or [Down] to select a function.
4. Press [Change], 6
th
Screen button to edit the option that is highlighted.
5. Use the 4
th
and 5
th
Screen button to navigate to the desired parameter
setting. Alternatively use [Left] or [Right] to navigate menus and Turn
(Jog) or [Up] or [Down] to select a function.
6. Press [Apply], 6
th
Screen button to conrm the option that is highlighted.