Polyend Tracker+ - Page 43

43
Polyend Tracker+ Manual
▌ SETTING THE METRONOME
1. Press [Cong] to open the project conguration menu.
2. Ensure the left window is highlighted red i.e. in focus. Navigate windows
by pressing [Left] or [Right]. Menu windows will automatically be
selected when pressing the relevant screen keys below the window to
navigate [Up] or [Down].
3. Press [Up] [Down] or Turn (Jog) to highlight with the bounding box over
the ‘Metronome’ option. Alternatively press the relevant screen keys
below the window to navigate [Up] or [Down].
4. Press the relevant screen keys below the window to navigate [Up] or
[Down] under the central options to highlight with the bounding box over
the required Metronome option.
5. To change the selected parameter / setting, Press [Enter], 8
th
Screen
button. The parameter pop-up window listing the available options will
appear.
6. Turn (Jog) or Press [Up] / [Down] or [Up] / [Down] Screen Buttons to
highlight the desired option.
7. Press [Apply], 8
th
Screen button to conrm selection or press [Cancel],
7
th
Screen button to exit without changing.
8. The metronome will operate at the chosen time signature and volume
when live recording is activated using [Rec] + [Play]. The Pre roll will
provide a count in of 4 and show the ‘Recording in 4. 3. 2. 1.’ message
before starting to record.
NOTES
Projects
3