50
Polyend Tracker+ Manual
Menu Option Description Book Section
General Recording Options
Sets the options for what is recorded i.e. notes,
quantization, micro-timing, velocity.
Sequencing
Steps
General Numbering Mode
Sets all numbers to the decimal starting at 0 or 1 or
hexadecimal format. Classic look and feel.
System
General Pattern Arrangement
Sets the pattern display to the traditional vertical
original, vertical revolver or horizontal display.
Patterns
General Pattern Top Info
Allows the top part of the pattern screen to display
only the track name, additional info or off.
Patterns
General Line In Channel
Selects the physical audio input for the global mixer
and sample recorder. Stereo, mono left, mono right.
Audio
MIDI Clock In
Sets the source of the master clock, Internal
(default) or external USB or MIDI In jack.
MIDI
MIDI Clock Out
Sets the Tracker+ Mini clock output. Off, USB, MIDI
Out jack, USB + MIDI Out jack.
MIDI
MIDI Transport In
Sets the source of transport control commands,
Internal (default) or external USB or MIDI In jack.
MIDI
MIDI Transport Out
Sets the output of transport control commands, Off,
USB, MIDI Out jack or USB+MIDI jack options.
MIDI
MIDI Notes In
Sets the input routing of external notes in. Set to Off,
USB, MIDI In jack or USB+MIDI jack options.
MIDI
MIDI Notes Input Channel
Sets the MIDI channel for incoming notes from
external gear. Select All channels or Ch 1-16.
MIDI
MIDI MIDI Out
Sets the MIDI output routing between, Off, USB,
MIDI Out jack or USB+MIDI jack options.
MIDI
MIDI CC In
Sets CC (control change) input routing to Off, USB,
MIDI In jack, USB+MIDI In jack.
MIDI
MIDI CC In channel
Sets MIDI channel for CC (control change) incoming
messages. Select All channels or Ch 1-16.
MIDI
MIDI Middle C
Sets middle C as C-3, C-4, C-5, C-6. Calibrates
range in Tracker+ with external gear.
MIDI
MIDI Clock Sync Correction
Latency compensation for incoming sync. -6 to +6.
Use with MIDI Jack or USB clock in.
MIDI
Projects
3
To Next Page
Loading...
