Polyend Tracker+ - Page 71

71
Polyend Tracker+ Manual
NOTES
Pattern Format
4
▌ EDITING EXISTING STEPS IN A PATTERN
1. Press [Pattern] to select the pattern mode page.
2. To move the position vertically, Press [Up] or [Down] or Turn (Jog). To
move the position horizontally across tracks, or Press [Left] or [Right].
Ranges can be selected using [Shift] + Arrow Buttons.
3. Select recording mode, Press [Rec]. The steps selected will appear red
as opposed to green when normal playback mode is set.
4. To edit a step, press the dedicated step function button i.e. [Note],
[Instrument], [FX1], [FX2] and the selection will highlight the parameter
in the step selection bounding box.
5. Turn (Jog) to change the selected parameter for the current step.
▌ DELETING STEPS IN A PATTERN
1. Press [Pattern] to select the pattern mode page.
2. To move the position vertically, Press [Up] or [Down] or Turn (Jog). To
move the position horizontally across tracks, or Press [Left] or [Right].
3. Ensure a note or instrument parameter is selected. Deleting when the
FX1 or FX2 parameter is selected will only delete the FX parameter
setting and not the full step. MIDI Instruments would need the
parameter deleting specically
4. Press [Delete/Backspace]. The selected step or step range will be
deleted from the pattern.
▌ INSERTING STEPS IN A PATTERN
1. Press [Pattern] to select the pattern mode page.
2. To move the position vertically, Press [Up] or [Down] or Turn (Jog). To
move the position horizontally across tracks, or Press [Left] or [Right].
3. Press [Insert / Home]. A new empty step row is added and the selected
step and steps below are moved down.