82
Polyend Tracker+ Manual
NOTES
Sequencing Steps
5
▌ ENTERING STEPS WITH STEP JUMP
1. Press [Pattern] to select the Pattern Mode page.
2. Navigate to select a Step.
3. Press [Rec] to switch to recording mode. The step bounding box will
turn red and allow steps to be added.
4. Hold [Step Jump], 3
rd
Screen button + Turn (Jog). Set the value to the
step jump interval required.
5. Pressing a [PAD] will enter a step and advance the active step by the
value set in the ‘Step Jump’ setting.
6. Continue to press [PAD] to add more steps and advance by the set
interval or edit the current step manually.
To Next Page
Loading...
