Radioddity DB25-D - FM Radio

Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 104 of 252
received message → press the [Select]-key to display the full APRS data
(date, time, longitude, latitude, altitude, speed) that had been received →
press the [Back]-key to return to the previous level.
• GPS Location → press the [Select]-key to display the location information
(date, time, longitude, latitude, altitude, speed) of the Radioddity DB25-D,
DB40-D or GD-88 → rotate the [ENC] knob or use the [▲/▼]-keys to check
GPS / GL received satellites information and signal strength (white: empty
signal, red: weak signal, light blue: available signal) → press the [Select]-
key to return to the previous level.
• Clear RXMsg → press the [Select]-key to delete the received messages
and return to the previous level.
(4) GPS Upload Chn → press the [Select]-key to check Zone, Chn and SendGap
information → press the [Back]-key to return to the previous level.
(5) Calibrator → press the [Select]-key to choose from the following options:
• Auto → press the [Select]-key to turn the Auto-function On / Off.
• Manual → press the [Select]-key → Display Time zone and offset
compared to UTC (Coordinated Universal Time) → rotate the [ENC] knob
or use the [▲/▼]-keys to choose the desired time zone → press the
[Select]-key to confirm → return to the previous level.
Notes: GPS needs to be allowed by software. Some GPS functions must be preset by
software before use. For some GPS functions the radio location must be
identified successfully before use. Some GPS functions require other users to
have GPS functionality and their location been successfully identified as well
before use. The GPS Distance calculation or the use of some functions is for
reference only, which may cause errors due to some unexpected or
environmental reasons.
Notes: Because reception of GPS also requires some power from the battery it should
be turned off whenever not required.
10.9.2 FM Radio
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[▲/▼]-keys to choose Appendix and then press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to choose FM Radio and press
the [Select]-key to display the FM radio frequency information.
3. Rotate the [ENC] knob or use the [▲/▼]-keys to manually select the FM radio
frequency or seek the FM radio frequency automatically.