Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 18 of 252
3.2 Maintenance and Cleaning
To ensure the best performance and prolong working life, please acquaint
yourself with the following for maintenance and cleaning.
3.2.1 Maintenance
1. Please do not scratch or puncture the device with hard or sharp object.
2. Please do not place the device under direct solar radiation or in an
environment which can corrode electronic circuits.
3. Please do not carry the device by its antenna, headset or programming cable.
4. Please make sure the Speaker-Microphone / K1 plug is covered when not in
use.
5. Opening or modifying the device will void any warranty.
6. Any firmware not intended to be used with the device will void any warranty.
3.2.2 Cleaning
1. Please clean your device regularly by using a dry clean cloth or soft brush to
wipe the dust off the surface.
2. The keypads, control knob and housing of the device may become dirty from
use. Please use nonwoven wipes to clean them. Do not use chemicals to clean
it such as detergent, alcohol, spray, or petroleum products, on the device
surface or printed labels. Chemicals can damage the housing, display, and
remove the printing on the labels. Before powering on the radio, please make
sure the device is dry completely.
To Next Page
Loading...
