Radioddity DB25-D - Device Info

Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 110 of 252
• Play → press the [Select] to play the selected recording → return to the
previous level after finishing playing.
• Delete → press the [Select]-key → ‘Are you sure?’ pops up on the screen
→ press the [Ok]-key to confirm the deletion or press the [Back]-key to
cancel the deletion and return to the previous menu level
• Information → press the [Select]-key to display the detailed information
of the recording.
(3) Clear record → press the [Select]-key → ‘Are you sure?’ pops up on the
screen → press the [OK]-key to confirm deletion or press the [Back]-key to
cancel deletion and return to the previous level.
(4) Space Info → press the [Select]-key to display the total recorded time and
total recordable time information → press the [Back]-key to return to the
previous level.
Notes: More than 100h of recording time is possible, depending on the remaining
memory allocation of the radio.
10.11 Device Info
If it is allowed by CPS software, set and check Radio ID, Rx Group List, CH Contact
(channel contact), Version and Talker Alias by accessing Device Info menu.
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[▲/▼]-keys to choose Device Info and then press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to choose from the following
options:
(1) Radio ID → press the [Select]-key to display the Radio ID (DMR ID) → input
the desired ID with the numeric keypad of the Speaker-Microphone → press
the [OK]-key to save → ‘Set OK!’ pops up on the screen and returns to the
previous level.
(2) RXGrouplist → press the [Select]-key to display the RX-group list (name in
top line) and its members of the currently selected channel → Rotate the
[ENC] knob or use the [▲/▼]-keys to check details → press the [Back]-key to
return to the previous level.
(3) CH contact → press the [Select]-key to display the contact information
(ID, Name, Call Type) of the contact associated with the currently selected
channel → press the [Back]-key to return to the previous level.
(4) Version → press the [Select]-key to display the Model Number, Frequency
Range (F136-174,F400-480), firmware version and version date and time →
press the [Back]-key to return to the previous level.