Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 93 of 252
(1) A/B RepeatSw → Press the [Select]-key to switch repeater-mode On or Off
for the currently selected channel → press the [Back]-key to return to the
previous level
(2) A/B ListenSw → Press the [Select]-key to turn monitoring of the currently
selected channel On or Off → press the [Back]-key to return to the previous
level. The parameter is only evaluated by the radio firmware if A/B RepeatSw
is turned On.
(3) A RepeatMode → Press the [Select]-key to choose for VFO-A from
OFF The currently selected channel is not in repeater-mode.
Tran_Rx The currently selected channel is supposed to be part of a
repeater-setup and RX is only enabled if the channel is in
repeater-mode.
Tran_Tx The currently selected channel is supposed to be part of a
repeater-setup and TX is only enabled if the channel is in
repeater-mode.
TranRxTx The currently selected channel is supposed to be part of a
repeater-setup and RX and TX are both enabled if the
channel is in repeater-mode.
(4) B RepeatMode → Press the [Select]-key to choose for VFO-B from
OFF The currently selected channel is not in repeater-mode.
Tran_Rx The currently selected channel is supposed to be part of a
repeater-setup and will act as the RX input channel.
Tran_Tx The currently selected channel is supposed to be part of a
repeater-setup and will act as the TX output channel.
TranRxTx The currently selected channel is supposed to be part of a
repeater-setup and may act as RX input and as TX output
channel.
10.6.9 SemiRepeaterMode
This option is only available if ‘SemiRepeaterMode’ has been previously enabled
using the CPS and a digital simplex channel has been selected for the current VFO.
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[▲/▼]-keys to choose Local Set and then press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to choose SemiRepeaterMode
and press the [Select]-key to choose from the following options:
To Next Page
Loading...
