Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 162 of 252
12.10.24 APRS TG
In digital APRS the APRS data will be transmitted to the TalkGroup, specified by
this parameter. The TalkGroup is depending on the network that is used by the
defined APRS channel. The following table lists some of those TalkGroups as
found on the DMR Brandmeister network. Normally the selected TimeSlot
doesn´t matter but the Call Type is ‘Private Call’
Hints: If you are using Brandmeister network, make sure you do set the Brand to
ETSI within the Brandmeister SelfCare Settings.
12.10.25 Report Slot
As digital APRS makes use of DMR repeaters we need DMR Tier 2 with its support
for TimeSlots. This parameter defines the TimeSlot to be used for transmitting
your APRS beacon data. You may either specify a specific TimeSlot or just use the
TimeSlot of the currently selected digital channel.
To Next Page
Loading...
