Radioddity DB25-D - DB25-D Firmware as of November 23 Rd, 2022; DB25-D Firmware as of October 25 Th, 2022

Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 205 of 252
15.1.2 DB25-D firmware as of November 23
rd
, 2022
revision
Changes
released
909E.D4.EARSAB.018
• DMR ID data now properly
displayed (no more display of wrong
DMR database data)
• Assignment of 1450 Hz Pilot tone
now fixed (also requires at least CPS
3.3
DMR CPS_DRS [9.2.16])
• minor fixes within the Talker Alias
display
• ‘Dual Watch’ added as option to be
assigned for a programmable
function key. This results to the very
same functionality as the switch for
Single or Dual VFO display mode
found within the radio menu at
‘Local Set → DisplayMode → S/D
mode’
• support for programming cable
based on FTDI-chip
2022-11-23
15.1.3 DB25-D firmware as of October 25
th
, 2022
revision
Changes
released
909E.D4.EARSAB.017
• Talker Alias (TA) now supported.
• Besides 1750 Hz, the radio now also
supports pilot tones / burst tones of
700 Hz, 1000 Hz, 1400 Hz, 1450 Hz
and 2100 Hz (requires newest CPS
release for support of those)
• ‘TimeOfCall’ label now displayed in
English instead of Chinese
• After changing a contact of call type
‘Private Call’ to ‘Group Call’, it is now
possible again to change it back to
‘Private Call
• ’If a menu had been selected and a
call comes in, the menu remains
selected and navigation within the
menu is still possible
2022-10-25