Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 109 of 252
10.9.7 BlueTooth
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[▲/▼]-keys to choose Appendix and then press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to choose BlueTooth and press
the [Select]-key to choose from the following options:
(1) BlueTooth Sw → Press the preset [Record On/Off] key to turn it on / off.
If Bluetooth is turned on, further parameters may be selected:
(2) BT Earset → press the [Select]-key → Select Earset Scan to scan for available
and supported earsets → next select one of the found earsets → depending
on the earset, you may hear a confirmation sound. Now all further audio
output is routed to the paired BT earset.
(3) BT PTT → press the [Select]-key → Select PTT Scan to scan for available and
supported BT buttons → next select one of the found BT buttons. Now PTT
can be activated by pressing the paired BT button
(4) Mic Gain → press the [Select]-key → choose the desired Microphone Gain
by rotating the [ENC] knob → press [Select] key → ‘Set OK!’ pops up on the
screen and the radio returns to the previous level.
(5) Volume Gain → press the [Select]-key → choose the desired Volume Gain by
rotating the [ENC] knob → press [Select] key → ‘Set OK!’ pops up on the
screen and the radio returns to the previous level.
10.10 Record
If it is allowed by CPS software to set and check recording list, clear record, space
info about recording by accessing the Record menu.
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[▲/▼]-keys to choose Record and then press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to make following options:
(1) Record Set → press the [Select]-key -+ Rotate the [ENC] knob or use the
[▲/▼]-keys to choose between the options RX record SW and TX record SW
→ press the [Select]-key to turn the selected option On or Off → press the
[Back]-key to return to the previous level.
(2) Record List → press the [Select]-key to display the recording list → rotate the
[ENC] knob or use the [▲/▼]-keys to choose the desired recording (they are
named as follows: <ascending number>_<R/T><DMR_ID>) and press the
[Select]-key to choose from the following options:
To Next Page
Loading...
