Radioddity DB25-D - Createmsg; Common Messages Commmsg

Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 78 of 252
10.2.2 CreateMsg
1. Press the preset [SMS]-key to access the menu.
or
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[▲/▼]-keys to select Message and press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to CreateMsg and press the
[Select]-key to enter the message editing interface.
3. After editing, press the [OK]-key to choose from one of following options:
(1) SearchLinkman → rotate the [ENC] knob or use the [▲/▼]-keys to choose
the contact → press the [PTT]-key of the Speaker-Microphone to initiate a
call or press the [Select]-key to send the message → ‘MSG SENDING’ pops
up on the screen → press the [Back]key to return to the previous level.
(2) WriteNumber → input the contact number using the numeric keypad of
the Speaker-Microphone → press the [OK]-key to send the → ‘MSG
SENDING’ pops up on the screen → press the [Back]key to return to the
previous level.
(3) lnsertComMsg (Insert Common Message) → press the [Select]-key →
rotate the [ENC] knob or use the [▲/▼]-keys to choose the desired
message → press the [OK]-key → the inserted text is added to the text →
edit or press the [OK]-key to return to the previous level.
(4) Save → press the [Select]-key to save the message to the Draftbox →
return to the previous level.
(5) ExitEditor → press the [Select]-key to return to the previous level.
10.2.3 Common Messages CommMsg
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[▲/▼]-keys to select Message and press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to select CommMsg and press the
[Select]-key to enter the common message list or ‘Empty! Do you want Add?’
text pops up on the screen.
3. In common message list → rotate the [ENC] knob or use the [▲/▼]-keys to
select the desired message → press the [Select]-key and choose from one of
the following options:
• Display → Press the [Select]-key to display the full message → Press the
[Back]-key to return to the previous level.