Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 193 of 252
Off Squelch will be opened regardless of the CTCSS, DCS
or DCS-I values received from the transmitting radio.
Default: Off
13.32 TX QD/DQT (TX CTCSS/DCS)
Depending on the option selected as ‘TX SQ’, this is the place to specify the CTCSS
frequency or DCS/DCS-I code.
Default: Off
13.33 APRS
Specify the APRS channel to be used when transmitting the APRS beacon. Either
one of the 8 digital APRS channels or the analog APRS definition may be assigned
for APRS of this channel.
Options: maximum: 8
Minimum: 1
Increment: 1
APRS(A) Transmit the APRS beacon using analog APRS
Off Turn off APRS for this channel
Default: Off
Notes: Analog APRS (‘APRS(A)’) is currently only possible if the channel is an analog
channel as well (CH Mode set to ‘analog’).
To Next Page
Loading...
