Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 139 of 252
12.5.3 RX Indicator
You can activate or disable the working status of the LED indicator for receiving a
signal thru this parameter.
Options: On LED indicator is on when the radio is receiving
Off LED indicator is off when the radio is receiving
Default: On
12.5.4 Scanning Indicator
You can activate or disable the working status of the LED indicator for scanning
thru this parameter.
Options: On LED indicator is on and flashing when the radio is scanning
Off LED indicator is off when the radio is scanning
Default: On
12.5.5 Low battery Indicator
You can activate or disable the working status of the LED indicator for battery
voltage being less than the preset battery power level with this parameter.
Options: On LED indicator is on and flashing when the battery voltage is less
than preset battery power level
Off LED indicator is off when the battery voltage is less than preset
battery power level
Default: On
To Next Page
Loading...
