Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 171 of 252
Notes: When Scanning is turned on and VFO A is currently selected, the radio will no
longer monitor VFO B. When Scanning is turned on and VFO B is currently
selected, the radio will no longer monitor VFO A.
12.14.1 Scan List
The user can edit, rename, or delete the name of the scan/roaming list. The
maximum length of the Scan list name may need exceed 10 characters, using
letters, numbers, spaces and special marks. Leaving the name empty is not
allowed. It is possible, to set up a maximum of 250 San lists, each containing up
to 50 Channels.
Press the button ‘+ Add’ to add a new scan list with the name specified by the
input field ‘Scan List’ to the existing scan lists. The total number of scan lists will
increase by 1.
Mark one of the existing scan lists. Its name will be displayed in the input field
‘Scan List’. Now press the button ‘- Del’ to delete than scan list from the existing
scan lists. The total number of scan lists will decrease by 1.
12.14.2 Talkback
The feature allows the user to press [PTT]-key to transmit on the current received
channel, during scanning or within 3s after the received signal has disappeared.
Options: On Activate Talkback
Off Deactivate Talkback. Talkback/reply will be based on the setting
of ‘Scan TX Mode’.
Default: Off
Notes: When the talkback is set ‘ON’, the setting of ‘Scan TX Mode’ will be ignored.
When the talkback is set ‘Off’, the setting of ‘Scan TX Mode’ will be evaluated.
To Next Page
Loading...
