Radioddity DB25-D - Managing Radio Settings with CPS

Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 119 of 252
11.3.1 Special functions
Some of the computers keyboard function keys have been assigned special
functionality within the CPS.
Key
Function
F1
Turn Toolbar On/Off
F2
Turn Navigation bar On/Off
F3
Turn Status bar On/Off
F4
Font
F5
Background Color
F6
Font Color
F7
English
F8
Chinese
F9
Stack-up
F11
Tile horizontal
F12
Tile Vertical
Ctrl+O
Read codeplug from file (File → Open)
Ctrl+S
Write codeplug to file (File → Save)
Ctrl+X
Exit CPS (File → Exit)
Ctrl+K
Radio COM-port (Device → Comm)
Ctrl+R
Transfer data from radio to CPS (Device → Read)
Ctrl+W
Transfer data from CPS to radio (Device → Write)
11.3.2 Safe factory settings to a file
Before you start making your first changes, transfer the data from your radio to
your PC and safe them as ‘factory settings’ for later use. It is always advisable to
have the original factory settings at hand.
11.3.3 Connect to the radio
Make sure, that your radio is connected with the supplied programming cable to
your Windows machine. Start by clicking on ‘Comm’ within the toolbar.
You will then be presented a list of COM-ports identified on your Windows
machine. This is required before any ‘Read’- or ‘Write’-Operation from/to the
radio.