Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 127 of 252
12.2.4 Busy Channel Lockout
In literature, this parameter is often abbreviated as BCL. Users are allowed to turn
the Busy Channel Lockout on or off.
Options: On Turn on the busy channel lockout. The radio will be forbidden to
transmit when receiving signals to protect the call quality of other
users on this frequency.
Off Turn off the busy channel lockout. The radio is allowed to
transmit while receiving signals.
Default: Off
12.2.5 VOX
Users are allowed to turn VOX on or off. With VOX turned on, once the
microphone detects audio, the radio will automatically transmit.
Options: On Users don't have to press [PTT] to transmit.
Off Users need to press [PTT] to transmit.
Default: Off
12.2.6 VOX Sensitivity
This is used to adjust the VOX sensitivity level. There are 12 levels, where level 1
is the lowest and level 12 is the highest. It is recommended to choose a suitable
level to avoid triggering of VOX accidentally or having difficulty to trigger VOX at
all. Some elements, such as component type, using surroundings, speaking
volume of the user and so on, should be considered so as to choose the most
suitable level to achieve the best performance.
Options: Maximum: 12
Minimum: 1
Stepping: 1
Default: 4
12.2.7 Power-saving
As the radio is operated by a battery with limited capacity, it is advisable to make
best use of its capacity. Therefore, the Radioddity GD-88 has 3 additional
parameters: ‘Power-saving’, ‘Power Saving Ratio’ and ‘Save power startup time’. In
order to activate the power-saving function, also called ‘Sleep Mode’, it needs to
be turned to ‘On’
Options: On Power-saving mode (Sleep Mode) is activated
Off Power-saving mode (Sleep Mode) is deactivated
Default: On
To Next Page
Loading...
