Radioddity DB25-D - Accessing the Menus and Operations

Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 67 of 252
7.1 Accessing the menus and operations
Access the main menu and submenu options to set or browse various parameters
(like message checking, editing, and sending, etc.) through the following
operations and steps. Some of the menus may be enabled or disabled using the
Radioddity CPS.
Icon
description
Indicates an On (green) /Off (red) switch
Indicates a selected and executed items
Indicates to enter the next submenu option
1. In Standby Mode, press the [Menu]-key to access the menu.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to select the desired ‘Main Menu’
item, and press the [Select]-key to enter the submenu
3. Rotate the [ENC] knob or use the [▲/▼]-keys to select the desired submenu
item, and press the [Select]-key to enter
or
1. Rotate the [ENC] knob or use the [▲/▼]-keys to select and set the current
parameter and press the [Select]-key to confirm the setting and return to the
previous level.
or
1. Press the [Select]-key to select ‘On’ or ‘Off’.
2. Press the [Back]-key to return to the previous level.
3. If needed, continue to browse other menus by repeating the above steps or
return to the ‘Main Menu’ for other operations.
Notes: No matter where the ‘ ’ icon, ‘PTT’ or ‘CTRL’ is shown left to the current VFO
A or B, the setting for some of the parameters applies to both VFOs.
For more details, please check chapter 5.13 Common functions on page 55.