Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 133 of 252
RSSI values: Maximum: - 90 dBm
Minimum: - 125 dBm
Recommendation : - 100 dBm
Notes: The received signal strength (RSSI threshold value) is settable. If the RSSI
mode is enabled and the searched repeater RSSI value is more than the
preset threshold, the repeater's transmitting signal coverage will be
automatically recognized as good, and then the radio will suspend RSSI
roaming.
The stopped repeater is not necessarily the one with the largest RSSI value
in the channels of the scan list.
12.2.21 Connect Check Timer
When the nearest available repeater is searched by Manual Roaming, the radio
will immediately pause at the repeater channel based on your preset connect
check timer. If the available repeater is not confirmed by pressing the [OK]-key
within the preset time, once the timer reaches the preset time, the radio will stop
roaming; or restart roaming to find the next available repeater.
Timer values: Maximum: 255s
Minimum: 0s
Recommendation: 60S
12.2.22 Connect Repeater Check Timer
When the available repeaters are searched by Auto roaming or RSSI roaming and
the radio confirmed to lock at the currently available repeater then the roaming
is paused. Now, the radio will transmit signals at regular intervals based on the
preset Connect Repeater Check Timer to connect with the current repeater. If it
fails to connect with the currently available repeater in preset Connect Time of
transmission (defined by Connect Time), the radio will restart Auto Roaming or
RSSI Roaming to search any nearest available repeater.
Timer values: Maximum: 255s
Minimum: 0s
Recommendation: 60S
12.2.23 Connect Time
No matter which roaming mode is selected, in searching, each repeater channel
in the scan list will try to connect with nearby available repeaters based on the
preset Connect Time. If the pause channel fails to find the available repeaters
within the preset Connect Time, it will continue to scan the next repeater channel
from the list till it finds an available one.
To Next Page
Loading...
