Radioddity DB25-D - Radio Revive; Call Alert; Group Call Hang Time

Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 148 of 252
12.9.5 Radio Revive
It allows the radio to receive and deal with the ‘Radio Revive’ command, and
activate itself to be used again.
Options: On Allow and accept to be revived by other radios
Off Forbid other radios to revive this radio
Default: Off
Notes: The function may be assigned to one of the function keys. For more details,
please check chapter 12.6 Preset Keys on page 140.
12.9.6 Call Alert
It allows the radio to receive and deal with the ‘Call Alert’ command, and will reply
to it at its convenience.
Options: On Allow the radio to receive the call alert command
Off Forbid the radio to receive call alert command
Default: Off
12.9.7 Group Call Hang Time
The duration that the radio will reply back to a received call or continues the
transmitted Talk within a Group Call of the received or transmitted digital Group
ID. This allows to answer on a call, although the active TalkGroup is not selected
within the current channel, but is a member of the RX group that is associated
with the current channel. After the specified time has expired, the channel will
transmit to the designated contacts (digital group) as programmed for the current
channel.
Options: Maximum: 7000 ms
Minimum: 0 ms
Increment: 500 ms
Default: 3000 ms