Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 84 of 252
2. Hold and long press the Radioddity GD-88 [▲/▼]-key to turn on scan, and
press any key to turn if off
or
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[▲/▼]-keys in order to select Scan and press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to Scan and press the [Select]-
key to enter.
3. Rotate the [ENC] knob or use the [▲/▼]-keys to choose from the following
options:
(1) Select List → press the [Select]-key to enter → rotate the [ENC] knob or use
the [▲/▼]-keys to choose the desired scan list → press the [Select]-key to
confirm the selection → ‘Set OK!’ pops up on the screen → return to the
previous level.
(2) Scan On/Off → press the [Select]-key to turn it On or Off.
(3) RoamScan On/Off → press the [Select]-key to turn it On or Off.
10.4.2 Scan List
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[▲/▼]-keys in order to select Scan and press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to Scan list and press the [Select]-
key to enter.
3. Rotate the [ENC] knob or use the [▲/▼]-keys to the desired scan list and press
the [Select]-key to enter the list.
4. Rotate the [ENC] knob or use the [▲/▼]-keys for below options:
(1) Choose one of the channels, press the [Select]-key to choose from the
following options:
• Set Prior → press the [Select]-key to set the channel to be priority → ‘Prior
is Set’ pops up on the screen → return to the channel list, where the
current channel is additionally marked with a P.
• Cancel Prior → press the [Select]-key to cancel the priority channel →
‘Cancelled’ pops up on the screen → Return to the channel list, where the
‘P’ letter disappears on current channel.
• Channel Del → press the [Select]-key to delete the channel from the scan
list → Return to the channel list.
To Next Page
Loading...
