Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 132 of 252
12.2.19 Roaming Mode
Users can enable this function according to the working environment and their
actual needs.
options: Auto Once searching an available repeater from the
scan list, the radio will lock to the current available
repeater and pause auto roaming. Then, it will
connect with the available repeater according to
the preset Connect Check Timer. If the connection
fails after the preset Connect Time is used up, it
will restart the strong signal Auto roaming search.
Manual Users can manually roam to the next available
repeater. Once it is on, all repeater channels in the
scan list will be waken up to search the nearest
available repeaters until an available one has been
found. Every time the nearest available repeater is
found, a Connect Re-check Timer (Repeater
Check Timer) will be enabled. Users can also lock
the repeater by short pressing the [OK/Select]-key.
The next available repeater is not necessarily the
one with the largest RSSI value in the channels of
the scan list.
Strong RSSI Priority Once a repeater in the channels of the scan list
with RSSI more than preset RSSI threshold value
is searched by RSSI mode, the radio will lock to
the current channel and pause the strong signal
auto roaming. Then it will connect with the current
repeater according to the preset Connect Check
Timer. If the connection fails after the preset
Connect Time is used up, it will restart the strong
signal Auto roaming search.
Default: Auto
12.2.20 RSSI Set
When the radio is set for ‘Auto’ roaming scan and scanned the largest RSSI value
of the members of the [Scan/Roam list], it will lock to the current member channel
with the largest RSSI value and stop the strong signal automatic roaming. Then
the radio will trigger the ‘Repeater Check Timer’ for handshake confirmation with
the current channel repeater based on the preset connect times. If a handshake
is not confirmed with the repeater within the preset connect times, the radio will
restart the strong signal automatic roaming search for a repeater with the largest
RSSI in the member list.
To Next Page
Loading...
