Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 142 of 252
To turn recording On or Off
To turn the Mandown function On or Off
To turn the Repeater-mode On or Off
To turn Repeater monitoring On or Off
To transmit a 700 Hz signal (analog pilot tone)
To transmit a 1000 Hz signal (analog pilot tone)
To transmit a 1200 Hz signal (analog pilot tone)
To transmit a 1400 Hz signal (analog pilot tone)
To transmit a 1450 Hz signal (analog pilot tone)
To transmit a 2100 Hz signal (analog pilot tone)
Turn Promiscuous mode On or Off
Press assigned Preset Key to access the menu without
pushing the [ENC] knob
Emulating the Speaker-Microphones Up-Key
Emulating the Speaker-Microphones Down-Key
Emulating the back key of the radio base on one of the
Speaker-Microphones programmable keys
Switch between QT, DQT and DQI and no signaling
QT is the equivalent to CTCSS
DQT is the equivalent to DCS
DQI is the equivalent to DCS-inverted
Emulating the B/E key of the radio base on one of the
Speaker-Microphones programmable keys
Emulating the Volume key of the radio base on one of the
Speaker-Microphones programmable keys
Turn display of both VFOs On or Off