Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 184 of 252
The Radioddity DB40-D/GD-88 will digitally
receive on VFO-A (144.100 MHz), TS 1, CC1
and analog transmit the received signal on
VFO-B (433.100 MHz), acting as a digital to
analog crossband-repeater.
Notes: If ‘Relay Monitor’ is turned on for the input channel, only those signals will be
monitored that do match the RX-group settings.
Do not forget to activate Repeater-Mode as described in chapter 10.6 Local
Set - ABRepeat on page 92. The upper display line should state ‘A->B’.
To Next Page
Loading...
