R&S FSPN - Page 371

Remote Control
R&S
®
FSPN
371User Manual 1179.4363.02 ─ 01
Prerequisites for this command
●
Select a weighting filter with [SENSe:]CORRection:WEIGhting:SELect
on page 371.
Example: //Delete the currently selected weighting filter
CORR:WEIG:DEL
Usage: Event
Manual operation: See "Managing weighting filters" on page 118
[SENSe:]CORRection:WEIGhting:NAME
<Name>
This command defines the name for a weighting filter whose values are applied to the
calculation of residual effects.
Setting parameters:
<Name> String containing the name of the filter.
Example: //Create a weighting filter called "FILTER", with a comment and
a few data points
CORR:WEIG:NAME 'FILTER'
CORR:WEIG:COMM 'Here's an example for a
filter.'
CORR:WEIG:DATA 10MHZ,0DB,20MHZ,2DB,40MHZ,5DB
Manual operation: See "Designing weighting filters" on page 118
[SENSe:]CORRection:WEIGhting:SELect <Name>
This command selects a weighting filter whose values are applied to the calculation of
residual effects.
Setting parameters:
<Name> String containing the name of the weighting filter.
Example: //Select a weighting filter called "filter"
CORR:WEIG:SEL 'FILTER'
Manual operation: See "Managing weighting filters" on page 118
11.6.6.3 Spot Noise Configuration
CALCulate<n>:SNOise<s>:AOFF....................................................................................372
CALCulate<n>:SNOise<s>:STATe................................................................................... 372
CALCulate<n>:SNOise<s>:X.......................................................................................... 372
CALCulate<n>:SNOise<s>[:TRACe<t>]:DECades:X?........................................................372
CALCulate<n>:SNOise<s>[:TRACe<t>]:DECades:Y?........................................................373
CALCulate<n>:SNOise<s>[:TRACe<t>]:DECades[:STATe].................................................373
CALCulate<n>:SNOise<s>[:TRACe<t>]:USERdefined[:STATe]........................................... 374
CALCulate<n>:SNOise<s>[:TRACe<t>]:Y?.......................................................................374
DISPlay:SNINfo[:STATe]................................................................................................. 375
DISPlay:SNINfo:TRACe..................................................................................................375
Common Measurement Settings