R&S TSMA6 - Page 133

Troubleshooting
R&S
®
TSMA6
133User Manual 4900.8057.02 ─ 11
1. Check the LEDs of the device (see Chapter 11.1, "LED indicated errors",
on page 125).
● If an error is indicated, follow the instructions according to the indicated error.
● If no error is indicated, continue with step 2.
2. Evaluate the results of the selftest (see Chapter 11.2, "Evaluate selftest file",
on page 126).
● If an error is listed, check the error type.
● If no error is listed, continue with step 3
3. Start the web GUI (see Chapter 6.1.1, "Using the R&S TSMA6 web GUI",
on page 43).
Check "Mode of Operation" and "IP Settings".
● If the "Mode of Operation" = "PC Mode", continue with step 4.
Scanner is not found from software (R&S ROMES, R&S NESTOR)