R&S TSMA6 - Page 50

Configuring the R&S TSMA6
R&S
®
TSMA6
50User Manual 4900.8057.02 ─ 11
1. Turn on the R&S TSMA6 scanner.
2. In the web-GUI, set the "Mode of Operation" to "QualiPoc" (1) and press "Submit"
(2).
3.
On the handheld device, start the QualiPoc
®
application.
4.
Touch the main menu , and then touch "Device manager"
5. Touch the plus sign (+) at the top of the screen and touch "NCM".
Figure 6-1: Add NCM
QualiPoc
®
displays "NCM" under "Devices".
Note: The NCM provides the Bluetooth
®
connection to the scanner.
6. Touch "Scan" at the top of the screen and wait until the scanning process stops.
Selecting measurement mode