14-60 Accessories in the Drive System Rexroth IndraDrive Rexroth IndraDrive
DOK-INDRV*-SYSTEM*****-PR02-EN-P
Extension for Module Bus Connections
Application
The bus cable RKB0001 is used to extend module bus connections of
HMV01.1E and HMV01.1R devices with HMS01 / HMD01 drive
controllers.
The extension is required, if the distance between the drive controllers is
more than 5 mm.
The bus cable can be ordered with lengths of 0.5 m to 40 m in steps of
0.5 m.
The cable consists of
• housing with hinged cover
• cable with strain relief mounted at both ends
For ordering generate the complete order code:
Example for required length 2.5 m:
• required length: 2.5 m
• type designation: RKB 0001
• order code RKB 0001 / 02,5
Scope of Supply
The RKB bus cable is available as an option, it is not part of the standard
scope of supply.
Montage_Modulbus_verlaengerung_HMV_HMS.jpg
Fig. 14-67: Extension of module bus
To Next Page
Loading...
