Ricoh B291 - Page 366

SERVICE PROGRAM MODE TABLES
B291/B295/B296/B297 5-106 SM
T:Scan PGS/Comp [0~9999999/ 1]
8 711
These SPs count the number of compressed pages scanned into the
document server, counted by the formats listed below.
8 711 1 JPEG/JPEG2000
8 711 2 TIFF (Multi/Single)
8 711 3 PDF
8 711 4 Other
S:Scan PGS/Comp [0~9999999/ 1]
8715
These SPs count the number of compressed pages scanned by the scan
application, counted by the formats listed below.
8 715 1 JPEG/JPEG2000
8 715 2 TIFF (Multi/Single)
8 715 3 PDF
8 715 4 Other
RX PGS/Port [0~9999999/ 0 / 1]
8741
These SPs count the number of pages received by the physical port used to
receive them.
8741 1 PSTN-1
8741 2 PSTN-2
8741 3 PSTN-3
8741 4 ISDN (G3,G4)
8741 5 Network
Dev Counter [0~9999999/ 0 / 1]
8771
These SPs count the frequency of use (number of rotations of the development
rollers) for black and other color toners.
Note: For machines that do not support color, the Black toner count is the same
as the Total count.
Pixel Coverage Ratio
8781
This SP displays the number of toner bottles used. The count is done based
on the equivalent of 1,000 pages per bottle.
8791 LS Memory Remain This SP displays the percent of space available
on the document server for storing documents.
[0~100/ 0 / 1]
Toner Remain [0~100/ 0 / 1]
8801
This SP displays the percent of toner remaining for each color. This SP allows
the user to check the toner supply at any time.
Note:
• This precise method of measuring remaining toner supply (1% steps) is
better than other machines in the market that can only measure in
increments of 10 (10% steps).
• This SP is expanded for color MFP and color LP machines. For this machine,
the count is done for black only.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA